Hardware · build

A Fallout terminal rebuilt around a LattePanda MU

Arnov Sharmaon Hackster

Original

Arnov Sharma built a working replica of the Fallout terminal, with a LattePanda MU doing the brains.

Can I build this?Intermediate · AI 4/5 · $150–300

Difficulty: Intermediate
AI-buildability: 4/5
Time: A weekend
Cost: $150–300

Parts

LattePanda MU

Tools

3D printersoldering iron

Starter prompt

Based on "A Fallout terminal rebuilt around a LattePanda MU" on Afterware: https://afterware.xyz/p/a-fallout-terminal-rebuilt-around-a-lattepanda-mu

Build a Fallout-style terminal UI in Python with pygame, running full-screen on a LattePanda MU connected to a small touchscreen. Use a green phosphor palette, a scanline overlay, and a typed-command prompt that responds to a few commands like HELP, STATUS and LOGOUT. Include a boot sequence animation before the prompt appears.

Estimates based on the original write-up. How AI-buildability is scored. Building with an AI assistant? Connect it to Afterware (free MCP server).

Story

Arnov Sharma made a replica of the terminal from Fallout, and the LattePanda MU is what runs it. The source post is a single line, so the build's enclosure, screen and interface details aren't on the page.

A LattePanda MU is a small x86 board that runs full Windows, which makes it a clean way to drive a retro-styled screen without wrestling with microcontroller firmware. If you want a similar terminal, start with a board like this, a monitor or touchscreen sized for the bezel you have in mind, and a case that hides the wiring.